Datasheet Texas Instruments TLC2652C-8DG4 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | TLC2652 |
| Artikelnummer | TLC2652C-8DG4 |
Präzisions-Chopper-stabilisierter Operationsverstärker 8-SOIC
Datenblätter
TLC2652, TLC2652A, TLC2652Y Advanced LinCMOS Precision Chopper-Stabilized Op Amp datasheet
PDF, 1.1 Mb, Revision: E, Datei veröffentlicht: Feb 9, 2005
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 8 |
| Package Type | D |
| Industry STD Term | SOIC |
| JEDEC Code | R-PDSO-G |
| Width (mm) | 3.91 |
| Length (mm) | 4.9 |
| Thickness (mm) | 1.58 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.75 |
| Mechanical Data | Herunterladen |
Parameter
| Additional Features | Zero Drift |
| Approx. Price (US$) | 2.55 | 1ku |
| Architecture | CMOS |
| CMRR(Min)(dB) | 120 |
| CMRR(Typ)(dB) | 140 |
| GBW(Typ)(MHz) | 1.9 |
| Input Bias Current(Max)(pA) | 60 |
| Iq per channel(Max)(mA) | 2.4 |
| Iq per channel(Typ)(mA) | 1.5 |
| Number of Channels(#) | 1 |
| Offset Drift(Typ)(uV/C) | 0.01 |
| Operating Temperature Range(C) | -40 to 125 |
| Output Current(Typ)(mA) | 3 |
| Package Group | SOIC |
| Package Size: mm2:W x L (PKG) | See datasheet (PDIP) |
| Rail-to-Rail | In to V- Out |
| Rating | Catalog |
| Slew Rate(Typ)(V/us) | 2.8 |
| Total Supply Voltage(Max)(+5V=5, +/-5V=10) | 16 |
| Total Supply Voltage(Min)(+5V=5, +/-5V=10) | 3.8 |
| Vn at 1kHz(Typ)(nV/rtHz) | 23 |
| Vos (Offset Voltage @ 25C)(Max)(mV) | 0.003 |
Öko-Plan
| RoHS | Not Compliant |
| Pb Free | No |
Anwendungshinweise
- AB-174: Getting the Full Potential from your ADC (Rev. A)PDF, 72 Kb, Revision: A, Datei veröffentlicht: Jun 28, 2002
Many of today?s high-resolution ADCs (Analog-to-Digital Converters) are operating from a single supply and use fully differential inputs. This can be a problem for single-ended signals that are bipolar relative to common. This article illustrates circuit configurations that preserve the full-scale input range by using modern features, such as Programmable Gain Amplifiers (PGAs) and internal voltag - Choosing an ADC and Op Amp for Minimum OffsetPDF, 72 Kb, Datei veröffentlicht: Oct 28, 1999
Designing a mixed-signal circuit containing analog and digital components can be a challenge to the development engineer. Requirements such as a low single-polarity supply voltage and a high degree of precision may conflict, and make the choice of components and the best circuit design difficult. This report discusses problems that arise in using operational amplifiers (op amps) for signal conditi
Modellreihe
Serie: TLC2652 (13)
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps
Andere Namen:
TLC2652C8DG4, TLC2652C 8DG4