Datasheet Texas Instruments THS6032IDWP — Datenblatt
Hersteller | Texas Instruments |
Serie | THS6032 |
Artikelnummer | THS6032IDWP |
Low-Power ADSL Central Office Leitungstreiber 20-SO PowerPAD -40 bis 85
Datenblätter
Low-Power ADSL Central-Office Line Driver datasheet
PDF, 1.2 Mb, Revision: F, Datei veröffentlicht: Aug 25, 2009
Auszug aus dem Dokument
Preise
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | No |
Verpackung
Pin | 20 |
Package Type | DWP |
Industry STD Term | HSOIC |
JEDEC Code | R-PDSO-G |
Package QTY | 25 |
Carrier | TUBE |
Device Marking | THS6032I |
Width (mm) | 7.52 |
Length (mm) | 12.82 |
Thickness (mm) | 2.55 |
Pitch (mm) | 1.27 |
Max Height (mm) | 2.65 |
Mechanical Data | Herunterladen |
Parameter
2nd Harmonic | 79 dBc |
3rd Harmonic | 68 dBc |
@ MHz | 1 |
Acl, min spec gain | 1 V/V |
Additional Features | Shutdown |
Architecture | Current FB |
BW @ Acl | 100 MHz |
CMRR(Min) | 64 dB |
CMRR(Typ) | 72 dB |
GBW(Typ) | 100 MHz |
Input Bias Current(Max) | 9000000 pA |
Iq per channel(Max) | 10.8 mA |
Iq per channel(Typ) | 8.3 mA |
Number of Channels | 2 |
Offset Drift(Typ) | 10 uV/C |
Operating Temperature Range | -40 to 85,0 to 70 C |
Output Current(Typ) | 440 mA |
Package Group | SO PowerPAD |
Package Size: mm2:W x L | 20SO PowerPAD: 133 mm2: 10.405 x 12.825(SO PowerPAD) PKG |
Rail-to-Rail | No |
Rating | Catalog |
Slew Rate(Typ) | 1200 V/us |
Total Supply Voltage(Max) | 32 +5V=5, +/-5V=10 |
Total Supply Voltage(Min) | 10 +5V=5, +/-5V=10 |
Vn at 1kHz(Typ) | 2.8 nV/rtHz |
Vn at Flatband(Typ) | 2.4 nV/rtHz |
Vos (Offset Voltage @ 25C)(Max) | 5 mV |
Öko-Plan
RoHS | Compliant |
Anwendungshinweise
- Active Output Impedance for ADSL Line DriversPDF, 636 Kb, Datei veröffentlicht: Nov 26, 2002
Signal termination is very common in bidirectional communication systems. Termination allows for receiving signals while transmitting different signals at the same time. With the increasing popularity of asymmetrical digital subscriber lines (ADSL), the requirement for a low power line driver amplifier combined with line termination becomes a very difficult goal. This application note examines the - Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revision: A, Datei veröffentlicht: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Modellreihe
Serie: THS6032 (5)
- THS6032CDWP THS6032IDWP THS6032IDWPR THS6032IGQER THS6032IVFPG4
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)