Datasheet Texas Instruments TLV1544CD — Datenblatt
| Hersteller | Texas Instruments |
| Serie | TLV1544 |
| Artikelnummer | TLV1544CD |
10-Bit 85 kSPS ADC Ser.
Datenblätter
Low-Voltage 10-Bit A-D Converters w/Serial Control and 4/8 Analog Inputs datasheet
PDF, 1.1 Mb, Revision: C, Datei veröffentlicht: Jan 21, 1999
Auszug aus dem Dokument
Preise
Detaillierte Beschreibung
Out, Pgrmable Pwr / Pwrdn / Conversion Rate, TMS320 DSP / SPI / QPSI-Kompat., 4 Ch. 16-SOIC -40 bis 85
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 16 |
| Package Type | D |
| Industry STD Term | SOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 40 |
| Carrier | TUBE |
| Device Marking | TLV1544C |
| Width (mm) | 3.91 |
| Length (mm) | 9.9 |
| Thickness (mm) | 1.58 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.75 |
| Mechanical Data | Herunterladen |
Parameter
| # Input Channels | 4 |
| Analog Voltage AVDD(Max) | 5.5 V |
| Analog Voltage AVDD(Min) | 2.7 V |
| Architecture | SAR |
| Digital Supply(Max) | 5.5 V |
| Digital Supply(Min) | 2.7 V |
| INL(Max) | 1 +/-LSB |
| Input Range(Max) | 5.5 V |
| Input Type | Single-Ended |
| Integrated Features | N/A |
| Interface | SPI |
| Multi-Channel Configuration | Multiplexed |
| Operating Temperature Range | -40 to 85 C |
| Package Group | SOIC |
| Package Size: mm2:W x L | 16SOIC: 59 mm2: 6 x 9.9(SOIC) PKG |
| Power Consumption(Typ) | 1.75 mW |
| Rating | Catalog |
| Reference Mode | Ext |
| Resolution | 10 Bits |
| Sample Rate (max) | 85kSPS SPS |
| Sample Rate(Max) | 0.085 MSPS |
Öko-Plan
| RoHS | Compliant |
Anwendungshinweise
- Interfacing the TLV1544 Analog-to-Digital Converter to the TMS320C50 DSP (Rev. A)PDF, 295 Kb, Revision: A, Datei veröffentlicht: Dec 28, 1998
This application report presents two hardware solutions for interfacing the TLV1544 10-bit low-power analog-to-digital converter (ADC) to the TMS320C50 16-bit fixed-point digital signal processor (DSP). The report describes the interface hardware and shows three C-callable software routines which support the data transfer. In addition, it provides useful hints on the design of a typical system pow - Interfacing the TLV1544 Analog-to-Digital Converter to the TMS320C203 DSP (Rev. A)PDF, 154 Kb, Revision: A, Datei veröffentlicht: Feb 15, 1999
This application report presents two hardware solutions for interfacing the TLV1544 10-bit low-power analog-to-digital converter (ADC) to the TMS320C203 16-bit fixed-point digital signal processor (DSP). The report describes the interface hardware and shows a C-callable software routine which supports the data transfer. In addition, it provides useful hints on the design of a typical system power - Interfacing the TLV1544/1548 Analog Digital Converter to Digital ProcessorsPDF, 266 Kb, Datei veröffentlicht: Aug 1, 1997
This Application Report describes the hardware and software requirements for interfacing an A/D converter to a DSP and to a MCU. The 10-bit A/D converter TLV1544 (4 analog input channels) and the TLV1548 (8 analog input channels) from Texas Instruments have been used to develop such interface. Example software code has been written showing how to program the DSP and the MCU to control the A/D conv - Low-Power Signal Conditioning For A Pressure Sensor (Rev. A)PDF, 469 Kb, Revision: A, Datei veröffentlicht: May 18, 2015
- Choosing an ADC and Op Amp for Minimum OffsetPDF, 72 Kb, Datei veröffentlicht: Oct 28, 1999
Designing a mixed-signal circuit containing analog and digital components can be a challenge to the development engineer. Requirements such as a low single-polarity supply voltage and a high degree of precision may conflict, and make the choice of components and the best circuit design difficult. This report discusses problems that arise in using operational amplifiers (op amps) for signal conditi - Determining Minimum Acquisition Times for SAR ADCs, part 1 (Rev. A)PDF, 227 Kb, Revision: A, Datei veröffentlicht: Nov 10, 2010
This application report analyzes a simple method for calculating minimum acquisition times for successive-approximation register analog-to-digital converters (SAR ADCs). The input structure of the ADC is examined along with the driving circuit. The voltage on the sampling capacitor is then determined for the case when a step function is applied to the input of the driving circuit. Three different - Determining Minimum Acquisition Times for SAR ADCs, part 2PDF, 215 Kb, Datei veröffentlicht: Mar 17, 2011
The input structure circuit of a successive-approximation register analog-to-digital converter (SAR ADC) incombination with the driving circuit forms a transfer function that can be used to determine minimum acquisition times for different types of applied input signals. This application report, which builds on Determining Minimum Acquisition Times for SAR ADCs When a Step Function is Applied to
Modellreihe
Serie: TLV1544 (13)
Herstellerklassifikation
- Semiconductors > Data Converters > Analog-to-Digital Converters (ADCs) > Precision ADCs (<=10MSPS)