Datasheet Texas Instruments TPS60111PWP — Datenblatt
| Hersteller | Texas Instruments |
| Serie | TPS60111 |
| Artikelnummer | TPS60111PWP |
Geregelte geräuscharme 5-V-Hochleistungs-Ladepumpe DC / DC-Wandler 20-HTSSOP -40 bis 85
Datenblätter
Regulated 5-V 150-mA Low-Noise Charge Pump DC/DC Converter datasheet
PDF, 980 Kb, Revision: B, Datei veröffentlicht: Jun 4, 2008
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 20 |
| Package Type | PWP |
| Industry STD Term | HTSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 70 |
| Carrier | TUBE |
| Device Marking | TPS60111 |
| Width (mm) | 4.4 |
| Length (mm) | 6.5 |
| Thickness (mm) | 1 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.2 |
| Mechanical Data | Herunterladen |
Parameter
| Iout(Max) | 0.15 A |
| Iq(Typ) | 0.05 mA |
| Operating Temperature Range | -40 to 85 C |
| Package Group | HTSSOP |
| Rating | Catalog |
| Regulated Outputs | 1 |
| Special Features | Enable,Frequency Synchronization |
| Switching Frequency(Max) | 400 kHz |
| Switching Frequency(Min) | 200 kHz |
| Type | Charge Pump |
| Vin(Max) | 5.4 V |
| Vin(Min) | 2.7 V |
| Vout(Max) | 5 V |
| Vout(Min) | 5 V |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: TPS60110EVM-132
3 battery cells/1 Li-Ion cell to 5.0V, 300mA zero ripple charge pump EVM
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- TPS6010x/TPS6011x Charge Pump (Rev. A)PDF, 391 Kb, Revision: A, Datei veröffentlicht: Dec 16, 1999
Charge pumps are dc/dc converters that use a capacitor instead of an inductor or transformer for energy storage. They are able to generate positive or negative voltages from the input voltage. The input voltage can be multiplied by some factor such as 0.5, 2, 3, and so on, to generate the output voltage desired. Often, charge pumps and all related parts (including those used for energy storage) ar - PowerPAD Thermally Enhanced Package (Rev. H)PDF, 983 Kb, Revision: H, Datei veröffentlicht: Jul 6, 2018
- Extending the Soft Start Time Without a Soft Start Pin (Rev. B)PDF, 387 Kb, Revision: B, Datei veröffentlicht: Jun 15, 2017
- Performing Accurate PFM Mode Efficiency Measurements (Rev. A)PDF, 418 Kb, Revision: A, Datei veröffentlicht: Dec 11, 2018
When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.
Modellreihe
Serie: TPS60111 (3)
- TPS60111PWP TPS60111PWPG4 TPS60111PWPR
Herstellerklassifikation
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Charge Pump (Inductorless)