Datasheet Texas Instruments THS6043IPWP — Datenblatt
| Hersteller | Texas Instruments |
| Serie | THS6043 |
| Artikelnummer | THS6043IPWP |
350-mA-, +/- 12-V-ADSL-CPE-Leitungstreiber mit Abschaltung 14-HTSSOP -40 bis 85
Datenblätter
350 mA +/-12V ADSL CPE Line Drivers datasheet
PDF, 1.6 Mb, Revision: G, Datei veröffentlicht: Dec 11, 2001
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 14 |
| Package Type | PWP |
| Industry STD Term | HTSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 90 |
| Carrier | TUBE |
| Device Marking | HS6043I |
| Width (mm) | 4.4 |
| Length (mm) | 5 |
| Thickness (mm) | 1 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.2 |
| Mechanical Data | Herunterladen |
Parameter
| 2nd Harmonic | 67 dBc |
| 3rd Harmonic | 96 dBc |
| @ MHz | 1 |
| Acl, min spec gain | 1 V/V |
| Additional Features | Shutdown |
| Architecture | Current FB |
| BW @ Acl | 120 MHz |
| CMRR(Min) | 59 dB |
| CMRR(Typ) | 68 dB |
| GBW(Typ) | 120 MHz |
| Input Bias Current(Max) | 10000000 pA |
| Iq per channel(Max) | 10.5 mA |
| Iq per channel(Typ) | 8.2 mA |
| Number of Channels | 2 |
| Offset Drift(Typ) | 20 uV/C |
| Operating Temperature Range | -40 to 85,0 to 70 C |
| Output Current(Typ) | 350 mA |
| Package Group | HTSSOP |
| Package Size: mm2:W x L | 14HTSSOP: 32 mm2: 6.4 x 5(HTSSOP) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 1400 V/us |
| Total Supply Voltage(Max) | 33 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 9 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 2.4 nV/rtHz |
| Vn at Flatband(Typ) | 2.2 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 16 mV |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: THS6043EVM
THS6043 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Active Output Impedance for ADSL Line DriversPDF, 636 Kb, Datei veröffentlicht: Nov 26, 2002
Signal termination is very common in bidirectional communication systems. Termination allows for receiving signals while transmitting different signals at the same time. With the increasing popularity of asymmetrical digital subscriber lines (ADSL), the requirement for a low power line driver amplifier combined with line termination becomes a very difficult goal. This application note examines the - Wireline Data Transmission and ReceptionPDF, 191 Kb, Datei veröffentlicht: Jan 27, 2010
Many types of wires are widely used to transmit data. Specifically, Category 3 and Category 5 (Cat3 and Cat5e, respectively)—also known as unshielded twisted pair or UTP lines—are now recommended for new telephone installations. Coaxial (coax) cables are used to distribute cable television (CATV) signals throughout a home. #12 and #14 American wire gauge (AWG) electric power distribution wire is a - Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revision: A, Datei veröffentlicht: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Modellreihe
Serie: THS6043 (6)
- THS6043CPWP THS6043ID THS6043IPWP THS6043IPWPG4 THS6043IPWPR THS6043IPWPRG4
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)