Datasheet Texas Instruments LMP7704MT — Datenblatt
| Hersteller | Texas Instruments |
| Serie | LMP7704 |
| Artikelnummer | LMP7704MT |
Präzision, CMOS-Eingang, RRIO, Verstärker mit großem Versorgungsbereich 14-TSSOP -40 bis 125
Datenblätter
LMP770x Precision, CMOS Input, RRIO, Wide Supply Range Amplifiers datasheet
PDF, 1.4 Mb, Revision: I, Datei veröffentlicht: Nov 30, 2015
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | NRND (Not recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 14 | 14 |
| Package Type | PW | PW |
| Industry STD Term | TSSOP | TSSOP |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 94 | 94 |
| Carrier | TUBE | TUBE |
| Device Marking | LMP77 | 04MT |
| Width (mm) | 4.4 | 4.4 |
| Length (mm) | 5 | 5 |
| Thickness (mm) | 1 | 1 |
| Pitch (mm) | .65 | .65 |
| Max Height (mm) | 1.2 | 1.2 |
| Mechanical Data | Herunterladen | Herunterladen |
Ersatz
| Replacement | LMP7704MT/NOPB |
| Replacement Code | S |
Parameter
| Additional Features | N/A |
| Architecture | CMOS |
| CMRR(Min) | 88 dB |
| CMRR(Typ) | 130 dB |
| GBW(Typ) | 2.5 MHz |
| Input Bias Current(Max) | 1 pA |
| Iq per channel(Max) | 0.925 mA |
| Iq per channel(Typ) | 0.725 mA |
| Number of Channels | 4 |
| Offset Drift(Typ) | 1 uV/C |
| Operating Temperature Range | -40 to 125 C |
| Output Current(Typ) | 66 mA |
| Package Group | TSSOP |
| Package Size: mm2:W x L | 14TSSOP: 32 mm2: 6.4 x 5(TSSOP) PKG |
| Rail-to-Rail | In,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 1 V/us |
| Total Supply Voltage(Max) | 12 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.7 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 9 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 0.22 mV |
Öko-Plan
| RoHS | See ti.com |
Anwendungshinweise
- AN-1559 Practical RTD Interface Solutions (Rev. B)PDF, 120 Kb, Revision: B, Datei veröffentlicht: May 1, 2013
This application report is intended to review Resistance Temperature Devices (RTD) and commonly usedinterfaces for them. - AN-1515 A Comprehensive Study of the Howland Current Pump (Rev. A)PDF, 165 Kb, Revision: A, Datei veröffentlicht: Apr 26, 2013
It is well known to analog experts that you can use the positive and negative inputs of an operationalamplifier to make a high-impedance current source (current pump) using a conventional operationalamplifier (op amp). This basic circuit can put out both + and - output current (or zero current) into variousloads. The theory is simple. But the practical problems involved are not so simple or
Modellreihe
Serie: LMP7704 (5)
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps