Datasheet Texas Instruments TPS548D22RVFT — Datenblatt
| Hersteller | Texas Instruments |
| Serie | TPS548D22 |
| Artikelnummer | TPS548D22RVFT |
1,5Vin bis 16Vin, 40A SWIFT Synchron-Abwärtswandler mit voller Differenzialmessung 40-LQFN-CLIP -40 bis 125
Datenblätter
TPS548D22 1.5-V to 16-V VIN, 4.5-V to 22-V VDD, 40-A SWIFTв„ў Synchronous Step-Down Converter with Full Differential Sense datasheet
PDF, 8.2 Mb, Revision: D, Datei veröffentlicht: Jul 7, 2017
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 40 |
| Package Type | RVF |
| Industry STD Term | LQFN-CLIP |
| JEDEC Code | R-PQFP-N |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | TPS548D22 |
| Width (mm) | 5 |
| Length (mm) | 7 |
| Thickness (mm) | 1.46 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1.52 |
| Mechanical Data | Herunterladen |
Parameter
| Control Mode | D-CAP3 |
| Duty Cycle(Max) | 80 % |
| Iout(Max) | 40 A |
| Iq(Typ) | 2 mA |
| Operating Temperature Range | -40 to 125 C |
| Package Group | LQFN-CLIP |
| Rating | Catalog |
| Regulated Outputs | 1 |
| Special Features | Adjustable Current Limit,Enable,Light Load Efficiency,Output Discharge,Power Good,Pre-Bias Start-Up,Remote Sense,Synchronous Rectification,UVLO Adjustable |
| Switching Frequency(Max) | 1050 kHz |
| Switching Frequency(Min) | 425 kHz |
| Type | Converter |
| Vin(Max) | 16 V |
| Vin(Min) | 1.5 V |
| Vout(Max) | 5.5 V |
| Vout(Min) | 0.6 V |
Öko-Plan
| RoHS | Compliant |
| Pb Free | Yes |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: TPS548D22EVM-784
TPS548D22 DCAP3 High Performance, 40-A Single Synchronous Step-Down Converter Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Calculating Output Capacitance to Meet Transient and Ripple RequirementsPDF, 189 Kb, Datei veröffentlicht: May 2, 2017
This document provides guidance on how to calculate the amount of output capacitance needed to meet the transient and ripple requirements of a general buck converter design. DCAPx modulators are used in the example. - Accuracy-Enhanced Ramp-Generation Design for D-CAP3 Modulation (Rev. A)PDF, 493 Kb, Revision: A, Datei veröffentlicht: Apr 25, 2016
D-CAP and D-CAP2 control schemes have been widely used in TI Switched-Mode DC-DC converters due to their fast transient response and no off-chip compensation. Offset generated by current sense ramp adds an error to VFB and Vout and hence reduces DC accuracy. This paper introduces a new D-CAP3 control scheme which greatly improves DC accuracy of the converter while maintaining the same fast transie - SMT Guidelines for Stacked Inductor (Inductor On Top) on Voltage Regulator ICPDF, 409 Kb, Datei veröffentlicht: Feb 22, 2016
Modellreihe
Serie: TPS548D22 (2)
- TPS548D22RVFR TPS548D22RVFT
Herstellerklassifikation
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)