Datasheet Texas Instruments LM2747MTCX/NOPB — Datenblatt
| Hersteller | Texas Instruments |
| Serie | LM2747 |
| Artikelnummer | LM2747MTCX/NOPB |
1-14 V, 1% Genauigkeit, Synchron-Buck-Controller im Spannungsmodus mit Pre-Bias-Start und optionalem Cloc 14-TSSOP -40 bis 125
Datenblätter
LM2747 Synch Buck Cntrlr w/Pre-bias Startup 7 Optional Clk Synch datasheet
PDF, 1.3 Mb, Revision: B, Datei veröffentlicht: Mar 28, 2013
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 14 | 14 |
| Package Type | PW | PW |
| Industry STD Term | TSSOP | TSSOP |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 2500 | 2500 |
| Carrier | LARGE T&R | LARGE T&R |
| Device Marking | 2747 | MTC |
| Width (mm) | 4.4 | 4.4 |
| Length (mm) | 5 | 5 |
| Thickness (mm) | 1 | 1 |
| Pitch (mm) | .65 | .65 |
| Max Height (mm) | 1.2 | 1.2 |
| Mechanical Data | Herunterladen | Herunterladen |
Parameter
| Control Mode | Voltage Mode |
| Duty Cycle(Max) | 86 % |
| Iout(Max) | 20 A |
| Iq(Typ) | 1.7 mA |
| Number of Phases | 1 |
| Operating Temperature Range | -40 to 125 C |
| Package Group | TSSOP |
| Rating | Catalog |
| Regulated Outputs | 1 |
| Special Features | Enable,Frequency Synchronization,Power Good,Pre-Bias Start-Up,Synchronous Rectification,Tracking |
| Switching Frequency(Max) | 1000 kHz |
| Switching Frequency(Min) | 50 kHz |
| Type | Controller |
| Vin(Max) | 14 V |
| Vin(Min) | 1 V |
| Vout(Max) | 12 V |
| Vout(Min) | 0.6 V |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: LM2747-19AEVAL
LM2747 Synchronous Buck Controller with Pre-bias Startup, and Optional Clock Synchronization
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LM2747EVAL
Synchronous Buck Controller with Pre-bias Startup, and Optional Clock Synchronization
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- AN-1603 LM274X Reference Designs (Rev. C)PDF, 222 Kb, Revision: C, Datei veröffentlicht: May 1, 2013
This application note presents several reference designs that implement the LM274X synchronous buckcontroller. The designs address various applications in a wide variety of configurations. The designreference will give an engineer a head start on their project, with designs encompassing sequencing,tracking, synchronizing multiple power supplies, DDR termination, buck-boost, low PCB real esta - Current Limit Foldback Improves Short Circuit Protection in LM274X Family (Rev. B)PDF, 89 Kb, Revision: B, Datei veröffentlicht: Apr 23, 2013
This application report discusses the function of the low side current limit used in the LM274X, andpresents a simple method to enhance the short-circuit protection. the current limit is required to protect thepower components from thermal stress, which can reduce life span. Typically, high side current limitdesigns require an internal rising edge blanking time or external filter to avoid no - Optmiz Pwr Cntrlr Dsigns thru Utiliz Freq & Sync, Ext Ref, Trking & Precis ENPDF, 359 Kb, Datei veröffentlicht: Apr 24, 2008
- Reduce buck-converter EMI and voltage stress by minimizing inductive parasiticsPDF, 926 Kb, Datei veröffentlicht: Jul 21, 2016
Modellreihe
Serie: LM2747 (4)
- LM2747MTC LM2747MTC/NOPB LM2747MTCX LM2747MTCX/NOPB
Herstellerklassifikation
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Controller (External Switch)