TL082 TL082A TL082B
General purpose JFET dual operational amplifiers
Features Wide common-mode (up to VCC+) and differential voltage range Low input bias and offset current Output short-circuit protection High input impedance JFET input stage Internal frequency compensation Latch up free operation High slew rate: 16 V/µs (typical) D SO-8 (Plastic micropackage) N DIP8 (Plastic package) Description
The TL082, TL082A and TL082B are high speed JFET input dual operational amplifiers incorporating well matched, high voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low input bias and offset current, and low offset voltage temperature coefficient. P TSSOP8 (Thin shrink small outline package) Pin connections (top view) 1 2 3 4 + + 8 7 6 5 1 -Output 1 2 -Inverting input 1 3 -Non-inverting input 1 4 -VCC5 -Non-inverting input 2 6 -Inverting input 2 7 -Output 2 8 -VCC+ June 2008 Rev 10 1/17
www.st.com 17 Schematic diagram TL082 TL082A TL082B 1 Schematic diagram
Figure 1. Schematic diagram
VCC Non-inverting input Inverting input
1 0 0 2 0 0
Output 1 0 0 30k 1/2 TL082 8.2k 1.3k VCC 35k 1.3k 35k 1 0 0 2/17 TL082 TL082A TL082B Absolute maximum ratings and operating conditions 2 Absolute maximum ratings and operating conditions
Table 1.
Symbol VCC Vin Vid Ptot Supply voltage (1) Input voltage
(2) (3) Absolute maximum ratings
Parameter TL082I, AI, BI TL082C, AC, BC ±18 ±15 ±30 680 125 85 120 40 41 37 Infinite -65 to +150 1 200 1500 °C kV V V Unit V V V mW Differential input voltage Power dissipation Rthja Thermal resistance junction to ambient(4) SO-8 DIP8 TSSOP8 Thermal resistance junction to case SO-8 DIP8 TSSOP8 Output short-circuit duration (5) °C/W Rthjc °C/W Tstg Storage temperature range HBM: human body model(6)
(7) ESD MM: machine model CDM: charged device model(8) 1. All voltage values, except differential voltage, are with respect to the zero reference level (ground) of the supply voltages where the zero reference level is the midpoint between VCC+ and VCC-. 2. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts, whichever is less. 3. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. 4. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous shortcircuit on all amplifiers. 5. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded 6. Human body model: 100 …