Datasheet Texas Instruments OPA656N/250 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | OPA656 |
| Artikelnummer | OPA656N/250 |
Breitband-Verstärker mit stabilem FET-Eingang und Einheitsverstärkung 5-SOT-23 -40 bis 85
Datenblätter
OPA656 Wideband, Unity-Gain Stable, FET-Input Operational Amplifier datasheet
PDF, 1.3 Mb, Revision: H, Datei veröffentlicht: Sep 29, 2015
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 5 |
| Package Type | DBV |
| Industry STD Term | SOT-23 |
| JEDEC Code | R-PDSO-G |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | B56 |
| Width (mm) | 1.6 |
| Length (mm) | 2.9 |
| Thickness (mm) | 1.2 |
| Pitch (mm) | .95 |
| Max Height (mm) | 1.45 |
| Mechanical Data | Herunterladen |
Parameter
| 2nd Harmonic | 71 dBc |
| 3rd Harmonic | 81 dBc |
| @ MHz | 5 |
| Acl, min spec gain | 1 V/V |
| Additional Features | N/A |
| Architecture | FET,Voltage FB |
| BW @ Acl | 500 MHz |
| CMRR(Min) | 80 dB |
| CMRR(Typ) | 86 dB |
| GBW(Typ) | 500 MHz |
| Input Bias Current(Max) | 5 pA |
| Iq per channel(Max) | 16 mA |
| Iq per channel(Typ) | 14 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 2 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 70 mA |
| Package Group | SOT-23 |
| Package Size: mm2:W x L | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 290 V/us |
| Total Supply Voltage(Max) | 13 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 7 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 10 nV/rtHz |
| Vn at Flatband(Typ) | 7 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 0.6 mV |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: DEM-OPA-SO-1A
DEM-OPA-SO-1A Unpopulated PCB Compatible w/High Speed Wide Bandwidth Op Amps in 8-lead SOIC (D) Pkg
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: TSW7001EVM
TSW7001 Voltage-Controlled Amplifier Demonstration Kit
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: DEM-OPA-SOT-1A
Unpopulated PCB Compatible w/High Speed, Wide Bandwidth Op Amps in SOT(DBV) Pkg
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Measuring op-amp settling time by using sample-and-hold techniquePDF, 191 Kb, Datei veröffentlicht: Jan 31, 2012
- Measuring Board Parasitics in High-Speed Analog DesignPDF, 134 Kb, Datei veröffentlicht: Jul 7, 2003
Successful circuit designs using high-speed amplifiers can depend upon understanding and identifying parasitic PCB components. Simulating a design while including PCB parasitics can protect against unpleasant production surprises. This application report discusses an easy method for measuring parasitic components in a prototype or final PC board design by using a standard oscilloscope and low freq - 1Q 2012 Issue Analog Applications JournalPDF, 2.4 Mb, Datei veröffentlicht: Jan 31, 2012
- Voltage Feedback vs. Current Feedback Op AmpsPDF, 93 Kb, Datei veröffentlicht: Nov 30, 1998
This application report contrasts and compares the characteristics and capabilities of voltage and current feedback operational amplifiers. The report also points out the many similarities between the two versions. - Designing for low distortion with high-speed op ampsPDF, 277 Kb, Datei veröffentlicht: Mar 2, 2005
- Transimpedance Considerations for High-Speed Operational AmplifiersPDF, 193 Kb, Datei veröffentlicht: Nov 22, 2009
Designing high-resolution detection circuits using photodiodes presents considerable challenges because bandwidth, gain, and input-referred noise are coupled together. This application note reviews the basic issues of transimpedance design, provides a set of detailed design equations, explains those equations, and develops an approach to easily compare potential solutions. - Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revision: A, Datei veröffentlicht: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Modellreihe
Serie: OPA656 (12)
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)