Datasheet Texas Instruments LMZ20502SILT — Datenblatt
Hersteller | Texas Instruments |
Serie | LMZ20502 |
Artikelnummer | LMZ20502SILT |
SIMPLE SWITCHER® 2,7 V bis 5,5 V, 2A Nano-Modul mit hoher Dichte 8-uSiP-40 bis 125
Datenblätter
LMZ20502 2 A SIMPLE SWITCHERВ® Nano Module datasheet
PDF, 2.0 Mb, Revision: C, Datei veröffentlicht: Apr 24, 2015
Auszug aus dem Dokument
Preise
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes |
Verpackung
Pin | 8 | 8 | 8 | 8 | 8 |
Package Type | SIL | SIL | SIL | SIL | SIL |
Package QTY | 250 | 250 | 250 | 250 | 250 |
Carrier | SMALL T&R | SMALL T&R | SMALL T&R | SMALL T&R | SMALL T&R |
Device Marking | 0502 | EC | TXN5201EC | 0502 7543 EC | 7543 |
Parameter
Iout(Max) | 2 A |
Iq(Typ) | 0.072 mA |
Operating Temperature Range | -40 to 125 C |
Package Type | MicroSiP (LGA) |
Regulated Outputs | 1 |
Soft Start | Fixed |
Special Features | EMI Tested,Enable,Light Load Efficiency,Power Good |
Switching Frequency(Max) | 3200 kHz |
Switching Frequency(Min) | 2500 kHz |
Switching Frequency(Typ) | 3000 kHz |
Vin(Max) | 5.5 V |
Vin(Min) | 2.7 V |
Vout(Max) | 3.6 V |
Vout(Min) | 0.8 V |
Öko-Plan
RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: LMZ20502EVM
LMZ20502 2A SIMPLE SWITCHERВ® Nano Module Evaluation Board
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- AN-2169 LMZ10501 and LMZ10500 SIMPLE SWITCHER Nano Module (Rev. A)PDF, 298 Kb, Revision: A, Datei veröffentlicht: Apr 23, 2013
The LMZ10501 and LMZ10500 SIMPLE SWITCHER nano modules are easy-to-use DC-DC solutionsoptimized for space-constrained applications. The LMZ10501 is capable of driving up to 1A load withexcellent power conversion efficiency, line and load regulation. The LMZ10500 is a 650mA version moduleand is pin-to-pin compatible with the LMZ10501. - Understanding and Applying Current-Mode Control TheoryPDF, 409 Kb, Datei veröffentlicht: Aug 19, 2007
- AN-643 EMI/RFI Board Design (Rev. B)PDF, 742 Kb, Revision: B, Datei veröffentlicht: May 3, 2004
Application Note 643 EMI/RFI Board Design - AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A)PDF, 2.7 Mb, Revision: A, Datei veröffentlicht: Apr 23, 2013
This application report shows how to measure the critical points of a bode plot with only an audiogenerator (or simple signal generator) and an oscilloscope. The method is explained in an easy to followstep-by-step manner so that a power supply designer can start performing these measurements in a shortamount of time.
Modellreihe
Serie: LMZ20502 (2)
- LMZ20502SILR LMZ20502SILT
Herstellerklassifikation
- Semiconductors > Power Management > Power Modules > Non-Isolated Module > Step-Down (Buck) Module