Datasheet Texas Instruments CC1111F8RSP — Datenblatt
Hersteller | Texas Instruments |
Serie | CC1110-CC1111 |
Artikelnummer | CC1111F8RSP |
Sub-1-GHz-Funk-MCU mit bis zu 32 kB Flash-Speicher 36-VQFN 0 bis 85
Datenblätter
True System-on-Chip with Low-Power RF Transceiver and 8051 MCU datasheet
PDF, 3.6 Mb, Revision: H, Datei veröffentlicht: Jul 10, 2013
Auszug aus dem Dokument
Preise
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | No |
Verpackung
Pin | 36 |
Package Type | RSP |
Industry STD Term | VQFNP |
JEDEC Code | S-PQFP-N |
Package QTY | 490 |
Carrier | JEDEC TRAY (10+1) |
Device Marking | CC1111-F8 |
Width (mm) | 6 |
Length (mm) | 6 |
Thickness (mm) | .85 |
Pitch (mm) | .5 |
Max Height (mm) | .9 |
Mechanical Data | Herunterladen |
Parameter
ADC Resolution | 12 Bits |
CPU | 8051 |
Device Type | Wireless MCU |
Flash | Up to 32 KB |
GPIO | 21 |
Operating Temperature Range | -40 to 85,0 to 85 C |
Package Group | VQFN |
RAM | 4 KB |
Standby Current | 0.3 uA |
Technology | 433 MHz Band,868 MHz Band,915 MHz Band |
Öko-Plan
RoHS | Compliant |
Design Kits und Evaluierungsmodule
- JTAG Emulators/ Analyzers: CC-DEBUGGER
Debugger and Programmer for RF System-on-Chips
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: CC1110-CC1111DK
CC1110 and CC1111 Development Kit
Lifecycle Status: Active (Recommended for new designs) - Daughter Cards: CC1110EMK433
CC1110 Evaluation Module 433MHz
Lifecycle Status: Active (Recommended for new designs) - Daughter Cards: CC1110EMK868-915
CC1110 Evaluation Module 868-915MHz
Lifecycle Status: Active (Recommended for new designs) - Development Kits: SOC-BB
Battery Board for System-on-Chips
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- DN118 -- Porting SimpliciTI to the SmartRF CCxx10 Target BoardPDF, 308 Kb, Datei veröffentlicht: Dec 1, 2009
This design note describes how one can easily port the existing SimpliciTI examples to the SmartRF CCxx10 Target Board. - AN082 -- One Way and Two-Way Audio Communications using the CC1110 or CC2 (Rev. A)PDF, 905 Kb, Revision: A, Datei veröffentlicht: Sep 30, 2010
- AN101 - Bootloader for CC2510/11 and CC1110/1111 Soc(System-on-Chip) Transceiver (Rev. A)PDF, 868 Kb, Revision: A, Datei veröffentlicht: Sep 8, 2011
- DN109 -- Using I2S in CC111xFx and CC251xFxPDF, 202 Kb, Datei veröffentlicht: Jun 9, 2008
This design note describes the key elements and simple usage of the industry standard I2S peripheral. The main objective is to explain the CC111xFx/CC251xFx software configuration required to operate the I2S and to transfer digital audio with and without DMA support. - DN119 -- Asynchronous Serial Mode for CC111xFx and CC251xFx (Rev. A)PDF, 152 Kb, Revision: A, Datei veröffentlicht: Mar 21, 2012
- AN099 - Wireless Microphone with USB InterfacePDF, 565 Kb, Datei veröffentlicht: Jun 1, 2011
- AN080 -- LED Lighting with Remote Control using CC2510 and CC1110PDF, 765 Kb, Datei veröffentlicht: Sep 16, 2009
This note describes a LED lighting design based on CC2510 and TPS40211. CC2510 is 2.4GHz System-on-Chip Low Power RF Transceiver while TPS40211 is a wide input range current mode boost controller, which provides voltage regulation and support 8 LED in series. CC2510 provides the wireless control function including 16 steps dimmer and various flashing modes. The CC1110 is the sub 1GHz version of th - DN110 -- Main Radio Control State Transition TimesPDF, 136 Kb, Datei veröffentlicht: Jul 10, 2008
This design note explains the variations of the state transition timings of the internal state machine called main radio controller (MARC) for non-standard usage of the radio peripheral. Furthermore the adjustment of the frequency synthesizer calibration time is explained. - AN096 Using CC1190 Front End with CC1101 under FCC 15.247 (Rev. A)PDF, 563 Kb, Revision: A, Datei veröffentlicht: May 2, 2011
- DN101 -- Using the ADC to Measure Supply Voltage (Rev. A)PDF, 74 Kb, Revision: A, Datei veröffentlicht: Oct 22, 2007
This design note includes descriptions and a code example for easily measuring the supply voltage of a device by using the internal ADC. The code is only suitable for the CC1110, CC1111, CC2430, CC2431, CC2510 and CC2511 system on chip (SOC) devices. - DN102 -- SoC Temperature Sensor (Rev. A)PDF, 91 Kb, Revision: A, Datei veröffentlicht: Oct 22, 2007
This design note includes descriptions and a code example for easily measuring the temperature of a device by using the internal temperature sensor connected to the ADC. The code is suitable for the CC1110, CC1111, CC2430, CC2431, CC2510 and CC2511 system on chip (SOC) devices. - DN106 -- Power Modes in CC111xFx, CC243xFx, and CC251xFx (Rev. B)PDF, 177 Kb, Revision: B, Datei veröffentlicht: Feb 23, 2009
- DN115 -- Using PWM for Dimmer Function in LED LightingPDF, 89 Kb, Datei veröffentlicht: Jun 16, 2009
- DN114 -- Test_Signals_for_Debug_Purpose in CC111xFx, CC251xFx, and CC243x (Rev. A)PDF, 55 Kb, Revision: A, Datei veröffentlicht: Dec 11, 2008
DN114 - Test_Signals_for_Debug_Purpose in CC111xFx, CC251xFx, and CC243x - DN107 -- DMA and Radio Configuration (Rev. A)PDF, 859 Kb, Revision: A, Datei veröffentlicht: Dec 17, 2009
- AN105 -- Using 1W RF3858 Front End with CC1101 Under FCC 15.247 (Rev. A)PDF, 983 Kb, Revision: A, Datei veröffentlicht: Aug 3, 2011
- DN025 -- Johanson Technology Matched Balun Filters (Rev. A)PDF, 609 Kb, Revision: A, Datei veröffentlicht: Oct 13, 2011
- DN006 -- CC11xx Settings for FCC15.247 Solutions (Rev. B)PDF, 105 Kb, Revision: B, Datei veröffentlicht: Aug 17, 2010
- AN094 -- Using the CC1190 Front End with CC1101 under EN 300 220PDF, 371 Kb, Datei veröffentlicht: Jan 11, 2011
- DN036 -- CC1101+CC1190 600 kbps Data Rate, +19 dBm Transmit (Rev. A)PDF, 139 Kb, Revision: A, Datei veröffentlicht: Nov 7, 2011
- DN017 -- CC11xx 868/915 MHz RF Matching (Rev. A)PDF, 328 Kb, Revision: A, Datei veröffentlicht: Mar 31, 2008
There are three versions of the CC11xx reference design which have been published. This design note gives a short introduction to RF matching and important aspects when designing products using the CC11xx parts and discusses the differences between the three reference design revisions. - DN112 -- Using UART in CC111xFx CC243x CC251xFx and CC253xFx (Rev. B)PDF, 210 Kb, Revision: B, Datei veröffentlicht: Aug 11, 2009
This design note describes the key elements and simple usage of the CC111xFx/CC243xFx/CC251xFx/CC253xFx USART peripheral in UART mode. The main objective is to explain the CC111xFx/CC243xFx/CC251xFx/CC253xFx software required to operate the UART, with and without DMA support. - DN117 -- SimpliciTI-compatible UART DriverPDF, 605 Kb, Datei veröffentlicht: Sep 22, 2009
- DN116 -- Clearing Module Interrupt Flags in LPW SoC DevicesPDF, 211 Kb, Datei veröffentlicht: Aug 3, 2009
- DN113 CC111xFx CC243xFx CC251xFx CC253xFx SPI Interface (Rev. A)PDF, 133 Kb, Revision: A, Datei veröffentlicht: Aug 11, 2009
The purpose of this design note is to describe how to operate the two USARTs in synchronous SPI mode, both as a master and as a slave. - DN111 - Current Consumption for a Polling Receiver (Rev. A)PDF, 687 Kb, Revision: A, Datei veröffentlicht: Mar 24, 2009
- DN505 -- RSSI interpretation and timing (Rev. D)PDF, 129 Kb, Revision: D, Datei veröffentlicht: Jun 16, 2010
- AN050 -- Using the CC1101 in the European 868MHz SRD band (Rev. B)PDF, 223 Kb, Revision: B, Datei veröffentlicht: Sep 11, 2009
- DN508 -- Frequency Scanning using CC430Fx, CC110x, and CC111xFxPDF, 65 Kb, Datei veröffentlicht: Jan 25, 2010
The purpose of this design note is to show the necessary steps to successfully scan through a frequency band covering n numbers of channels, and find the strongest signal in the band. - DN005 -- CC11xx Sensitivity versus Frequency Offset and Crystal Accuracy (Rev. C)PDF, 96 Kb, Revision: C, Datei veröffentlicht: Aug 20, 2009
- DN022 -- CC110x CC111x OOK ASK Register Settings (Rev. E)PDF, 532 Kb, Revision: E, Datei veröffentlicht: Mar 8, 2012
- DN504 -- FEC Implementation (Rev. A)PDF, 110 Kb, Revision: A, Datei veröffentlicht: Oct 22, 2007
This design note explains the functionality of forward error correction (FEC) and how it is used in the CC1100, CC1101, CC1110, CC1111, CC1150, CC2500, CC2510, CC2511, and CC2550 devices. Example code for FEC implementation is included. - DN032 -- Options for Cost Optimized CC11xx MatchingPDF, 112 Kb, Datei veröffentlicht: Aug 25, 2010
- DN016 -- Compact Antenna Solution for 868/915 MHz (Rev. B)PDF, 832 Kb, Revision: B, Datei veröffentlicht: Aug 20, 2009
- DN019 -- Powering Low-Power RF Products (Rev. B)PDF, 327 Kb, Revision: B, Datei veröffentlicht: Sep 18, 2009
- DN507 -- FEC DecodingPDF, 264 Kb, Datei veröffentlicht: Jan 28, 2010
The purpose of this design note is to show how the FEC decoding implemented in HW on the CC1100, CC1100E, CC1101, CC1110Fx, CC1111Fx, CC1150, CC2500, CC2510Fx, CC2511Fx, and CC2550 can be implemented in SW. This is in particular very important for the CC430Fx device, which has the same radio as the CC1101 and CC1110/11Fx but without HW FEC included. - DN024 -- 868 MHz, 915 MHz and 955 MHz Monopole PCB Antenna (Rev. E)PDF, 1.0 Mb, Revision: E, Datei veröffentlicht: Feb 22, 2013
- DN502 -- CRC Implementation (Rev. D)PDF, 55 Kb, Revision: D, Datei veröffentlicht: Oct 27, 2009
- AN001 -- SRD regulations for license free transceiver operationPDF, 260 Kb, Datei veröffentlicht: Feb 1, 2006
- DN033 - Mitsubishi Ceramic Antenna for 868 MHz, 915 MHz & 955 (Rev. A)PDF, 685 Kb, Revision: A, Datei veröffentlicht: Sep 14, 2010
- DN023 -- 868 MHz, 915 MHz and 955 MHz Inverted F Antenna (Rev. C)PDF, 369 Kb, Revision: C, Datei veröffentlicht: Aug 30, 2011
- AN028 -- LC Filter with Improved High-Frequency AttenuationPDF, 254 Kb, Datei veröffentlicht: Feb 1, 2006
AN028 -- Improved LC Filter - AN014 -- Frequency Hopping SystemsPDF, 210 Kb, Datei veröffentlicht: Feb 1, 2006
- AN021 -- Voltage Level ConversionPDF, 212 Kb, Datei veröffentlicht: Feb 1, 2006
- DN011 -- RF Module Testing using SmartRF Studio (Rev. A)PDF, 325 Kb, Revision: A, Datei veröffentlicht: Mar 23, 2009
- DN018 -- Range Measurements in an Open Field Environment (Rev. A)PDF, 607 Kb, Revision: A, Datei veröffentlicht: Apr 15, 2008
This design note is a general description of how to set up open field range measurements and what has to be considered. Applies to all low power RF-ICs. - DN002 -- Practical Sensitivity TestingPDF, 364 Kb, Datei veröffentlicht: Dec 20, 2006
- AN003 -- SRD AntennasPDF, 358 Kb, Datei veröffentlicht: Feb 1, 2006
- DN000 - Design Note Overview (Rev. T)PDF, 126 Kb, Revision: T, Datei veröffentlicht: Oct 12, 2011
- DN031 -- CC-Antenna-DK Documentation and Antenna Measurements SummaryPDF, 2.3 Mb, Datei veröffentlicht: Aug 26, 2010
DN031 -- Design Notes - AN058 -- Antenna Selection Guide (Rev. B)PDF, 1.8 Mb, Revision: B, Datei veröffentlicht: Oct 6, 2010
- DN035 -- Antenna Quick Guide (Rev. A)PDF, 138 Kb, Revision: A, Datei veröffentlicht: Feb 12, 2013
Modellreihe
Serie: CC1110-CC1111 (11)
Herstellerklassifikation
- Semiconductors > Microcontrollers (MCU) > SimpleLink MCUs > SimpleLink wireless MCUs > SimpleLink CC131x Sub-1 GHz