Datasheet Texas Instruments CC2511F16RSP — Datenblatt
Hersteller | Texas Instruments |
Serie | CC2511 |
Artikelnummer | CC2511F16RSP |
2,4-GHz-Funk-Transceiver, 8051-MCU, 16-KB- oder 32-KB-Flash-Speicher und USB-Schnittstelle mit voller Geschwindigkeit 36-VQFN -50 bis 150
Datenblätter
Low-Power SoC (System-on-Chip) with MCU, memory, 2.4 GHz RF Transceiver, and USB datasheet
PDF, 3.9 Mb, Revision: G, Datei veröffentlicht: Mar 7, 2013
Auszug aus dem Dokument
Preise
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | No |
Verpackung
Pin | 36 |
Package Type | RSP |
Industry STD Term | VQFNP |
JEDEC Code | S-PQFP-N |
Package QTY | 490 |
Carrier | JEDEC TRAY (10+1) |
Device Marking | CC2511-F16 |
Width (mm) | 6 |
Length (mm) | 6 |
Thickness (mm) | .85 |
Pitch (mm) | .5 |
Max Height (mm) | .9 |
Mechanical Data | Herunterladen |
Parameter
Data Rate(Max) | 500 kbps |
Device Type | Wireless MCU |
Flash | 8, 16, 32 KB |
Key Software Features | SimpliciTI Supported |
Max VCC | 3.6 |
Min VCC | 2 |
Modulation Techniques | 2-FSK,GFSK,MSK |
Operating Temperature Range | -50 to 150 C |
RAM size | N/A KB |
RX Current (Lowest) | 14.7 mA |
Rating | Catalog |
Sensitivity (Best) | -103 dBm |
TX Power(Max) | 1 dBm |
Technology | Proprietary 2.4 GHz |
Throughput(Max) | 0.5 Mbps |
USB 2.0 | Yes |
Öko-Plan
RoHS | Compliant |
Design Kits und Evaluierungsmodule
- JTAG Emulators/ Analyzers: CC-DEBUGGER
Debugger and Programmer for RF System-on-Chips
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: BOOSTXL-CC1120-90
BoosterPack for Sigfox Applications from 902MHz to 928MHz
Lifecycle Status: Active (Recommended for new designs) - Development Kits: CC2510-CC2511DK
CC2510/CC2511 Development Kit
Lifecycle Status: Active (Recommended for new designs) - Daughter Cards: CC2511EMK
CC2511 USB Evaluation Module Kit
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: BOOSTXL-CC1125
CC1125 BoosterPack for 868/915 MHz Applications
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- DN105 -- Upgrade from CC2510/11 Preview to Released PartPDF, 54 Kb, Datei veröffentlicht: Sep 4, 2007
- DN402 -- Simple Audio Loopback Using CC251XPDF, 60 Kb, Datei veröffentlicht: Mar 25, 2007
This design note shows how to implement voice quality audio applications without using an external codec using the CC2510 and CC2511 devices. It includes a code example for a simple mono loopback with Вµlaw encoding / decoding. Code can easily be used on CC1110 and CC1111. - Using AES Encryption in CC111xFx and CC251xFx (Rev. C)PDF, 76 Kb, Revision: C, Datei veröffentlicht: Mar 13, 2015
This application report describes the key elements, and simple usage of the CC111xFx and CC251xFx Advanced Encryption Standard (AES) encryption and decryption coprocessor.The main objective of the document is to explain the CC111xFx and CC251xFx software required to operate the AES coprocessor, with and without DMA assistance. - DN021 - CC2500 and CC2510 Sensitivity versus Frequency Offset and Crystal AccuraPDF, 110 Kb, Datei veröffentlicht: Mar 10, 2008
This design note provides plots from sensitivity versus frequency offset measurements for different data rates on the CC2500 device. The results are also applicable for CC2510/CC2511. The required crystal accuracy is calculated from these plots. - DN004 Folded Dipole Antenna for CCC25xxPDF, 383 Kb, Datei veröffentlicht: Dec 5, 2006
DN00x Folded Dipole Antenna for CCC25xx - AN080 -- LED Lighting with Remote Control using CC2510 and CC1110PDF, 765 Kb, Datei veröffentlicht: Sep 16, 2009
This note describes a LED lighting design based on CC2510 and TPS40211. CC2510 is 2.4GHz System-on-Chip Low Power RF Transceiver while TPS40211 is a wide input range current mode boost controller, which provides voltage regulation and support 8 LED in series. CC2510 provides the wireless control function including 16 steps dimmer and various flashing modes. The CC1110 is the sub 1GHz version of th - AN099 - Wireless Microphone with USB InterfacePDF, 565 Kb, Datei veröffentlicht: Jun 1, 2011
- AN101 - Bootloader for CC2510/11 and CC1110/1111 Soc(System-on-Chip) Transceiver (Rev. A)PDF, 868 Kb, Revision: A, Datei veröffentlicht: Sep 8, 2011
- DN119 -- Asynchronous Serial Mode for CC111xFx and CC251xFx (Rev. A)PDF, 152 Kb, Revision: A, Datei veröffentlicht: Mar 21, 2012
- DN109 -- Using I2S in CC111xFx and CC251xFxPDF, 202 Kb, Datei veröffentlicht: Jun 9, 2008
This design note describes the key elements and simple usage of the industry standard I2S peripheral. The main objective is to explain the CC111xFx/CC251xFx software configuration required to operate the I2S and to transfer digital audio with and without DMA support. - DN110 -- Main Radio Control State Transition TimesPDF, 136 Kb, Datei veröffentlicht: Jul 10, 2008
This design note explains the variations of the state transition timings of the internal state machine called main radio controller (MARC) for non-standard usage of the radio peripheral. Furthermore the adjustment of the frequency synthesizer calibration time is explained. - DN115 -- Using PWM for Dimmer Function in LED LightingPDF, 89 Kb, Datei veröffentlicht: Jun 16, 2009
- DN114 -- Test_Signals_for_Debug_Purpose in CC111xFx, CC251xFx, and CC243x (Rev. A)PDF, 55 Kb, Revision: A, Datei veröffentlicht: Dec 11, 2008
DN114 - Test_Signals_for_Debug_Purpose in CC111xFx, CC251xFx, and CC243x - DN106 -- Power Modes in CC111xFx, CC243xFx, and CC251xFx (Rev. B)PDF, 177 Kb, Revision: B, Datei veröffentlicht: Feb 23, 2009
- DN101 -- Using the ADC to Measure Supply Voltage (Rev. A)PDF, 74 Kb, Revision: A, Datei veröffentlicht: Oct 22, 2007
This design note includes descriptions and a code example for easily measuring the supply voltage of a device by using the internal ADC. The code is only suitable for the CC1110, CC1111, CC2430, CC2431, CC2510 and CC2511 system on chip (SOC) devices. - DN102 -- SoC Temperature Sensor (Rev. A)PDF, 91 Kb, Revision: A, Datei veröffentlicht: Oct 22, 2007
This design note includes descriptions and a code example for easily measuring the temperature of a device by using the internal temperature sensor connected to the ADC. The code is suitable for the CC1110, CC1111, CC2430, CC2431, CC2510 and CC2511 system on chip (SOC) devices. - DN107 -- DMA and Radio Configuration (Rev. A)PDF, 859 Kb, Revision: A, Datei veröffentlicht: Dec 17, 2009
- DN509 -- Data Whitening and Random TX ModePDF, 183 Kb, Datei veröffentlicht: Apr 12, 2010
This document gives an overview of the data whitening and random data transmission circuitry in the CC430, CC1100, CC1100E, CC1101, CC1110, CC1111, CC1150, CC2500, CC2510, CC2511, and CC2550 devices. - AN048 -- 2.4GHz Chip Antenna (Rev. B)PDF, 1.9 Mb, Revision: B, Datei veröffentlicht: Mar 4, 2008
This application note describes the performance and characteristics of the Compact Reach Xtendв„ў chip antenna. This antenna is specifically designed to operate at 2.4 GHz and combines small size with high performance to improve the functionality of RF devices. - DN113 CC111xFx CC243xFx CC251xFx CC253xFx SPI Interface (Rev. A)PDF, 133 Kb, Revision: A, Datei veröffentlicht: Aug 11, 2009
The purpose of this design note is to describe how to operate the two USARTs in synchronous SPI mode, both as a master and as a slave. - DN112 -- Using UART in CC111xFx CC243x CC251xFx and CC253xFx (Rev. B)PDF, 210 Kb, Revision: B, Datei veröffentlicht: Aug 11, 2009
This design note describes the key elements and simple usage of the CC111xFx/CC243xFx/CC251xFx/CC253xFx USART peripheral in UART mode. The main objective is to explain the CC111xFx/CC243xFx/CC251xFx/CC253xFx software required to operate the UART, with and without DMA support. - DN117 -- SimpliciTI-compatible UART DriverPDF, 605 Kb, Datei veröffentlicht: Sep 22, 2009
- DN116 -- Clearing Module Interrupt Flags in LPW SoC DevicesPDF, 211 Kb, Datei veröffentlicht: Aug 3, 2009
- AN043 -- Small Size 2.4 GHz PCB Antenna (Rev. D)PDF, 2.3 Mb, Revision: D, Datei veröffentlicht: Apr 4, 2008
- AN032 -- 2.4 GHz RegulationsPDF, 332 Kb, Datei veröffentlicht: Jan 31, 2006
- DN111 - Current Consumption for a Polling Receiver (Rev. A)PDF, 687 Kb, Revision: A, Datei veröffentlicht: Mar 24, 2009
- DN505 -- RSSI interpretation and timing (Rev. D)PDF, 129 Kb, Revision: D, Datei veröffentlicht: Jun 16, 2010
- DN300 -- SmartRF04EB Troubleshooting (Rev. B)PDF, 490 Kb, Revision: B, Datei veröffentlicht: Mar 24, 2009
- AN068 - Design Steps and Results for Changing PCB Layer Thickness (Rev. A)PDF, 792 Kb, Revision: A, Datei veröffentlicht: Oct 8, 2009
- DN504 -- FEC Implementation (Rev. A)PDF, 110 Kb, Revision: A, Datei veröffentlicht: Oct 22, 2007
This design note explains the functionality of forward error correction (FEC) and how it is used in the CC1100, CC1101, CC1110, CC1111, CC1150, CC2500, CC2510, CC2511, and CC2550 devices. Example code for FEC implementation is included. - DN019 -- Powering Low-Power RF Products (Rev. B)PDF, 327 Kb, Revision: B, Datei veröffentlicht: Sep 18, 2009
- DN507 -- FEC DecodingPDF, 264 Kb, Datei veröffentlicht: Jan 28, 2010
The purpose of this design note is to show how the FEC decoding implemented in HW on the CC1100, CC1100E, CC1101, CC1110Fx, CC1111Fx, CC1150, CC2500, CC2510Fx, CC2511Fx, and CC2550 can be implemented in SW. This is in particular very important for the CC430Fx device, which has the same radio as the CC1101 and CC1110/11Fx but without HW FEC included. - DN502 -- CRC Implementation (Rev. D)PDF, 55 Kb, Revision: D, Datei veröffentlicht: Oct 27, 2009
- DN034 -- YAGI 2.4 GHz PCB AntennaPDF, 1.9 Mb, Datei veröffentlicht: Oct 14, 2010
- DN303 -- Cleanup of Installed PC ToolsPDF, 545 Kb, Datei veröffentlicht: Dec 20, 2006
- AN028 -- LC Filter with Improved High-Frequency AttenuationPDF, 254 Kb, Datei veröffentlicht: Feb 1, 2006
AN028 -- Improved LC Filter - AN014 -- Frequency Hopping SystemsPDF, 210 Kb, Datei veröffentlicht: Feb 1, 2006
- AN021 -- Voltage Level ConversionPDF, 212 Kb, Datei veröffentlicht: Feb 1, 2006
- DN011 -- RF Module Testing using SmartRF Studio (Rev. A)PDF, 325 Kb, Revision: A, Datei veröffentlicht: Mar 23, 2009
- DN018 -- Range Measurements in an Open Field Environment (Rev. A)PDF, 607 Kb, Revision: A, Datei veröffentlicht: Apr 15, 2008
This design note is a general description of how to set up open field range measurements and what has to be considered. Applies to all low power RF-ICs. - DN002 -- Practical Sensitivity TestingPDF, 364 Kb, Datei veröffentlicht: Dec 20, 2006
- AN003 -- SRD AntennasPDF, 358 Kb, Datei veröffentlicht: Feb 1, 2006
- DN000 - Design Note Overview (Rev. T)PDF, 126 Kb, Revision: T, Datei veröffentlicht: Oct 12, 2011
- DN031 -- CC-Antenna-DK Documentation and Antenna Measurements SummaryPDF, 2.3 Mb, Datei veröffentlicht: Aug 26, 2010
DN031 -- Design Notes - AN058 -- Antenna Selection Guide (Rev. B)PDF, 1.8 Mb, Revision: B, Datei veröffentlicht: Oct 6, 2010
Modellreihe
Serie: CC2511 (5)
- CC2511F16RSP CC2511F16RSPR CC2511F32RSP CC2511F32RSPG3 CC2511F32RSPR
Herstellerklassifikation
- Semiconductors > Wireless Connectivity > Proprietary 2.4 GHz