Datasheet Texas Instruments CC430F5147IRGZR — Datenblatt
| Hersteller | Texas Instruments |
| Serie | CC430F5147 |
| Artikelnummer | CC430F5147IRGZR |
CC430F614x, CC430F514x, CC430F512x SoC mit HF-Kern 48-VQFN -40 bis 85
Datenblätter
CC430F614x, CC430F514x, CC430F512x SoC With RF Core datasheet
PDF, 1.7 Mb, Revision: A, Datei veröffentlicht: Feb 27, 2013
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 48 | 48 |
| Package Type | RGZ | RGZ |
| Industry STD Term | VQFN | VQFN |
| JEDEC Code | S-PQFP-N | S-PQFP-N |
| Package QTY | 2500 | 2500 |
| Carrier | LARGE T&R | LARGE T&R |
| Device Marking | CC430 | F5147 |
| Width (mm) | 7 | 7 |
| Length (mm) | 7 | 7 |
| Thickness (mm) | .9 | .9 |
| Pitch (mm) | .5 | .5 |
| Max Height (mm) | 1 | 1 |
| Mechanical Data | Herunterladen | Herunterladen |
Parameter
| ADC | ADC10 - 6ch |
| Additional Features | Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset |
| Antenna Connection | Differential |
| CPU | MSP430 |
| CPU Core | MSP430 |
| CPU Processing Power Consumption | 160 uA/MHz |
| Data Rate (Max) | 500 kbps |
| Flash | 32 KB |
| Frequency | 20 MHz |
| Frequency Bands | 315,433,779,868,915,920 MHz |
| GPIO | 30 |
| I2C | 1 |
| Key Applications | Data logging, Remote monitoring systems, Wireless sensor networks |
| Max VCC | 3.6 |
| Min VCC | 1.8 |
| Non-volatile Memory | 32 KB |
| Operating Temperature Range | -40 to 85 C |
| Package Group | VQFN |
| Package Size: mm2:W x L | 48VQFN: 49 mm2: 7 x 7(VQFN) PKG |
| RAM | 4 KB |
| RF standard supported | Proprietary (Sub 1GHz) |
| ROM | N/A KB |
| RX Current (Lowest) | 15 mA |
| SPI | 1 |
| SRAM | 4 kB |
| Security | AES |
| Standard version | N/A |
| Standby Current | 2 uA |
| Timers - 16-bit | 2 |
| UART | 1 |
| Wake-on radio | Yes |
| Wakeup time from standby | 240 us |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: MSP-SA430-SUB1GHZ
Sub-1 GHz RF Spectrum Analyzer Tool
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- CC430 Wake-On-Radio Functionality (Rev. A)PDF, 210 Kb, Revision: A, Datei veröffentlicht: Jul 10, 2012
The Wake-On-Radio (WOR) feature of the CC430 is a recommended method for conserving power in wireless systems in which the radio periodically wakes up from SLEEP mode and listens for incoming packets. This application note describes the theory, RF1A registers, and timing of the WOR feature. It also describes the special use case of the CC430F61xx and CC430F51xx devices. This application note concl - CC430 RF Examples (Rev. C)PDF, 117 Kb, Revision: C, Datei veröffentlicht: Sep 7, 2012
This application report describes the library components and implementation of the RF code examples for the CC430F61xx and CC430F51xx sub-1GHz system-on-chip (SoC) devices. The examples include support for packet-handling modes, including variable and fixed length filtering, as well as the asynchronous and synchronous modes of communication. The document also explains the key RF configuration regi - CC430-Based Wireless Mesh Network Mains SwitchPDF, 966 Kb, Datei veröffentlicht: May 20, 2011
This application report describes a simple wireless mesh network running on a number of wireless power points. Each power point contains a timer switch and a power monitor. The mesh network is self learning. A data concentrator works through the various power points it discovers and forms a network. It can then program the on/off timing of the power point's switch and monitor its power consumption - AN088 -- SimpliciTI on the CC430 – Practical ModificationsPDF, 89 Kb, Datei veröffentlicht: Mar 10, 2010
- Using a DC-DC Converter to Reduce Power (Current) Consumption In CC430 SystemsPDF, 4.6 Mb, Datei veröffentlicht: Jul 5, 2011
This application report describes a method to reduce power consumption in CC430-based systems by using a step-down converter TPS62730. - AN072 -- Using the TAI-SAW TA0801A SAW Filter and External PA (Rev. A)PDF, 359 Kb, Revision: A, Datei veröffentlicht: Aug 19, 2009
- AN050 -- Using the CC1101 in the European 868MHz SRD band (Rev. B)PDF, 223 Kb, Revision: B, Datei veröffentlicht: Sep 11, 2009
- DN508 -- Frequency Scanning using CC430Fx, CC110x, and CC111xFxPDF, 65 Kb, Datei veröffentlicht: Jan 25, 2010
The purpose of this design note is to show the necessary steps to successfully scan through a frequency band covering n numbers of channels, and find the strongest signal in the band. - DN022 -- CC110x CC111x OOK ASK Register Settings (Rev. E)PDF, 532 Kb, Revision: E, Datei veröffentlicht: Mar 8, 2012
- DN005 -- CC11xx Sensitivity versus Frequency Offset and Crystal Accuracy (Rev. C)PDF, 96 Kb, Revision: C, Datei veröffentlicht: Aug 20, 2009
- DN032 -- Options for Cost Optimized CC11xx MatchingPDF, 112 Kb, Datei veröffentlicht: Aug 25, 2010
- DN016 -- Compact Antenna Solution for 868/915 MHz (Rev. B)PDF, 832 Kb, Revision: B, Datei veröffentlicht: Aug 20, 2009
- DN019 -- Powering Low-Power RF Products (Rev. B)PDF, 327 Kb, Revision: B, Datei veröffentlicht: Sep 18, 2009
- DN507 -- FEC DecodingPDF, 264 Kb, Datei veröffentlicht: Jan 28, 2010
The purpose of this design note is to show how the FEC decoding implemented in HW on the CC1100, CC1100E, CC1101, CC1110Fx, CC1111Fx, CC1150, CC2500, CC2510Fx, CC2511Fx, and CC2550 can be implemented in SW. This is in particular very important for the CC430Fx device, which has the same radio as the CC1101 and CC1110/11Fx but without HW FEC included. - DN024 -- 868 MHz, 915 MHz and 955 MHz Monopole PCB Antenna (Rev. E)PDF, 1.0 Mb, Revision: E, Datei veröffentlicht: Feb 22, 2013
- DN502 -- CRC Implementation (Rev. D)PDF, 55 Kb, Revision: D, Datei veröffentlicht: Oct 27, 2009
- AN001 -- SRD regulations for license free transceiver operationPDF, 260 Kb, Datei veröffentlicht: Feb 1, 2006
- DN033 - Mitsubishi Ceramic Antenna for 868 MHz, 915 MHz & 955 (Rev. A)PDF, 685 Kb, Revision: A, Datei veröffentlicht: Sep 14, 2010
- DN023 -- 868 MHz, 915 MHz and 955 MHz Inverted F Antenna (Rev. C)PDF, 369 Kb, Revision: C, Datei veröffentlicht: Aug 30, 2011
- DN018 -- Range Measurements in an Open Field Environment (Rev. A)PDF, 607 Kb, Revision: A, Datei veröffentlicht: Apr 15, 2008
This design note is a general description of how to set up open field range measurements and what has to be considered. Applies to all low power RF-ICs. - DN002 -- Practical Sensitivity TestingPDF, 364 Kb, Datei veröffentlicht: Dec 20, 2006
- AN003 -- SRD AntennasPDF, 358 Kb, Datei veröffentlicht: Feb 1, 2006
- DN000 - Design Note Overview (Rev. T)PDF, 126 Kb, Revision: T, Datei veröffentlicht: Oct 12, 2011
- DN031 -- CC-Antenna-DK Documentation and Antenna Measurements SummaryPDF, 2.3 Mb, Datei veröffentlicht: Aug 26, 2010
DN031 -- Design Notes - AN058 -- Antenna Selection Guide (Rev. B)PDF, 1.8 Mb, Revision: B, Datei veröffentlicht: Oct 6, 2010
- DN035 -- Antenna Quick Guide (Rev. A)PDF, 138 Kb, Revision: A, Datei veröffentlicht: Feb 12, 2013
- Design Considerations When Using the MSP430 Graphics LibraryPDF, 475 Kb, Datei veröffentlicht: Oct 5, 2012
LCDs are a growing commodity in todays market with products as diverse as children's toys to medical devices. Modern LCDs, along with the graphics displayed on them, are growing in complexity. A graphics library can simplify and accelerate development while creating the desired user experience. TI provides the MSP430 Graphics Library for use in developing products with the MSP430в„ў MCU. This
Modellreihe
Serie: CC430F5147 (2)
- CC430F5147IRGZR CC430F5147IRGZT
Herstellerklassifikation
- Semiconductors > Microcontrollers (MCU) > Other Microcontrollers > CC430