Datasheet Texas Instruments INA193AQDBVRQ1 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | INA193A-Q1 |
| Artikelnummer | INA193AQDBVRQ1 |
Automotive Grade, -16 V bis + 80 V, Low- oder High-Side, Hochgeschwindigkeits-Spannungsausgangsstrom-Shunt-Monitor 5-SOT-23 -40 bis 125
Datenblätter
INA19xA-Q1 Current Shunt Monitors –16-V to 80-V Common-Mode Range datasheet
PDF, 974 Kb, Revision: D, Datei veröffentlicht: Jul 31, 2015
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 5 |
| Package Type | DBV |
| Industry STD Term | SOT-23 |
| JEDEC Code | R-PDSO-G |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | BOG |
| Width (mm) | 1.6 |
| Length (mm) | 2.9 |
| Thickness (mm) | 1.2 |
| Pitch (mm) | .95 |
| Max Height (mm) | 1.45 |
| Mechanical Data | Herunterladen |
Parameter
| Bandwidth | 500,300,200 kHz |
| CMRR(Min) | 100 dB |
| Common Mode Voltage(Max) | 80 V |
| Common Mode Voltage(Min) | -16 V |
| Gain | 20,50,100 V/V |
| Gain Error | 2 % |
| Gain Error Drift(Max) | 100 ppm/В°C |
| Input Offset (+/-)(Max) | 2000 uV |
| Input Offset Drift (+/-)(Typ) | 2.5 uV/C |
| Iq(Max) | 0.95 mA |
| Operating Temperature Range | -40 to 125 C |
| PSRR(Typ) | 5 uV/V |
| Package Group | SOT-23 |
| Package Size: mm2:W x L | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG |
| Rating | Automotive |
| Special Features | Low-side Capable |
| Specified Common Mode Voltage | 12 V |
| Specified Power Supply Voltage | 12 V |
| Supply Voltage(Max) | 18 V |
| Supply Voltage(Min) | 2.7 V |
Öko-Plan
| RoHS | Compliant |
Anwendungshinweise
- Current Sensing With Near-Zero Common Mode Voltage with INA19xA-Q1PDF, 493 Kb, Datei veröffentlicht: Oct 26, 2015
This report provides a summary of using the INA19xA-Q1 device when the common mode voltage is close to zero volts. In this low common-mode voltage region, the output voltage has a large error. The example for this case is low-side current sensing with a differential input below 20 mV. The INA19xA-Q1 device is not a good fit for situations where the common mode voltage is near zero. Instead TI reco - High-Side Drive, High-Side Solenoid Monitor with PWM Rejection (Rev. A)PDF, 110 Kb, Revision: A, Datei veröffentlicht: Dec 1, 2016
- Current Measurements in Power SuppliesPDF, 95 Kb, Datei veröffentlicht: Dec 21, 2016
- Precision LED Brightness and Color Mixing With Discrete Current Sense AmplifiersPDF, 139 Kb, Datei veröffentlicht: Feb 28, 2017
- Current Mode Control in Switching Power SuppliesPDF, 95 Kb, Datei veröffentlicht: Feb 3, 2017
- Low-Drift, Precision, In-Line Motor Current Measurements with PWM Rejection (Rev. A)PDF, 150 Kb, Revision: A, Datei veröffentlicht: Dec 1, 2016
- Current Sensing in an H-BridgePDF, 104 Kb, Datei veröffentlicht: Dec 21, 2016
- High-Side Motor Current Monitoring for Over-Current Protection (Rev. A)PDF, 115 Kb, Revision: A, Datei veröffentlicht: Dec 1, 2016
- Current Sensing in a Programmable Logic Controller (PLC)PDF, 99 Kb, Datei veröffentlicht: May 3, 2017
Modellreihe
Serie: INA193A-Q1 (1)
- INA193AQDBVRQ1
Herstellerklassifikation
- Semiconductors > Amplifiers > Current Sense Amplifiers > Current Sense Amplifiers Analog Output